Skip to content

10Micron GM3000 HPS German Equatorial Mount

Contact Us
SKU 1453000

Availability: Contact Us

  • 10Micron GM3000 high precision German equatorial mount
  • Built for observatory use
  • Mount head 65kg (143lbs) with a payload capacity of 100kg/220lbs
  • High Speed Precision and Slew (HPS): Proprietary encoders on RA and DEC axis and high performance servo motors
  • <20 arc sec pointing accuracy and <1 arc sec tracking accuracy (0.6" RMS) for long exposure unguided imaging
  • Up to 12 degrees per second slewing
  • Internal cable routing for accessories
  • External Linux PC and control handset - no PC needed - and WiFi enabled

The 10Micron GM3000 HPS German equatorial mount is the third mount in their equatorial mount line-up. It shares the same high level of Italian engineering, craftmanship, build quality and features of all the other 10 Micron HPS mount range.

10Micron GM3000 HPS German Equatorial Mount

10 Micron GM3000 HPS mount head

With a weight of 65kg (143lbs; mount head only) this mount is designed for use in a permanent observatory. The GM3000 mount can carry a total equipment payload of up to 100kg (220lbs). This makes it an ideal mounting for instruments such as, for example, 200mm aperture refractors, 300mm diameter Newtonians and 450mm Cassegrain-type reflectors (e.g. CDK14/CDK17) along with their accessories (such as imaging cameras, filter wheels etc).


All 10Micron GM mounts come with a feature called HPS – High Precision and Speed - an innovation from 10Micron. They feature traditional worm and wheel pairs, and with the latest state of the art encoder technology allows these mounts to perform at the same level of precision as professional direct-drive mounts. 

The GM mounts utilise two high-precision proprietary (1/10th arcsec resolution) absolute encoders that are mounted directly on each axes. These encoders provide very impressive high precision GoTo pointing (typically to within 20 arc secs) and tracking accuracy (<1 arcsec).

Tracking Error of a 10Micron mount

The diagram above shows the 10Micron GM mount RA tracking error profile measured with an encoder coupled to the RA axis. To show how accurate the tracking is, Jupiter and its moon Ganymede are shown as they appear from Earth at the same scale in arc seconds.

The high-speed slewing of the mount, from 2 degrees to sprightly 20 degrees per second, is achieved using high performance servo motors.


The Mount

The GM3000’s Right Ascension and Declination axes, both of which are made of alloy steel (for maximum rigidity) are 80mm in diameter for RA and 50mm for DEC. The axes are driven by two servo brushless AC motors, with a belt drive reduction with automatic backlash recovery that results in a backlash-free system. Both axes feature classic worm and wheel pairs. The worm wheels are made of (B14) bronze, with a diameters of 244mm (215 teeth) for the RA, and 192mm (250 teeth) for DEC. The RA worm is 32mm in diameter, with the DEC worm being 24mm in diameter, and both are made of alloy steel.

The mount features a dual Vixen/Losmandy type dovetail mounting saddle clamp. This allows the mount to have a wide compatibility with many telescopes from different manufacturers. Once you have mounted your telescope and equipment onto the mount, you can then use the electronic balance function to achieve perfect balance in both RA and DEC without unlocking the clutches. The mount also features internal cable routing for data and/or power to accessories (e.g. CCD camera) for no cable snagging or tangling.

The GM mounts can track 30 degrees/2 hours past the meridian and means that long duration astrophotography is easily achievable. The absolute encoders allow extremely high tracking accuracy (<1 arcsec), and means that autoguiding is not necessary. However, the GM mounts do allow the use of an auto-guider, if needed, through the inclusion of a standard ST4-compatible guide port. 

Object Database

The built-in object database contains celestial objects from the major astronomical catalogues (e.g. Messier, SAO, NGC and more) down to 16th magnitude. The mount's tracking rates are adjustable depending on the object being studied and the orbital elements of comets, asteroids and even artificial satellites can be loaded directly to the mount (without the need for an external PC), so that these celestial objects can be followed across the sky accurately.

Electronic Control System

A PC is not required to operate the mount as GM mounts can be controlled using the supplied weatherproof 4-line control handset keypad, with the computer’s electronic "brain" being housed in an independent portable external control box.

10Micron GM Computer Controller Unit showing all the connection ports

The handset’s display and the large ergonomic keypad (ideal for when wearing gloves), features a red backlight for ease of use in the dark. An internal heater keeps the handset display warm when the mount is being used at low-temperatures which allows for maximum readability in all temperature and lighting conditions.

10Micron GM Handset showing the ergonomic keypad and 4-line display

The connectors of the motors, encoders, power and handset all use security lock screws for robust and secure connection.

Mount Control

If you wish to connect your own PC to control the mount, a WiFi, RS-232 or Ethernet connection is needed. The GM mounts can then be controlled using commonly available software packages via the proprietary 10Micron ASCOM driver (or Meade compatible command protocol). Included with the mount is software that creates a “virtual handset” on your PC with the same functionality and features as the physical hand set for easy (and familiar) control from your computer. Furthermore, the RS-232 port on the external can be utilised to control an observatory dome (and without a PC). The mount can also be parked in different user-defined positions in case of any internal "obstructions" and can also be switched on and off using the dedicated connector on the control box panel.  All these features help make the GM HPS mounts ideal for observatories and for remote operation. 

Package Contents  
  • GM 3000 HPS Mount head with built-in precision absolute axis-encoders and WiFi option included
  • Control box with onboard-intelligence Linux-processor, stand alone system V. 2 HPS version firmware
  • 4-line key pad unit with graphic display and temperature control (#1452059)
  • Counterweight bar with counterweight end stop
  • Allen key set
  • Power and connection cables
  • USB stick with software and manual

Please note:

  • In order to purchase the GM3000, mandatory shipping kit is required. This kit  comprises of the pier adaptor (#1453090) and the shipping crate (#1453100). The pier adaptor can be used to mount the GM3000 onto a customer or Baader pier.
  • Counterweights, Dovetail clamp, pier adaptor and power supply are not supplied as standard with this package. 
Type German Equatorial Mount
Weight (mount) 65 kg – 143 lbs without accessories
Instrument payload capacity 100 kg – 220 lbs
Latitude range 20° – 70°
Azimuth fine adjustment range +/− 10°
Counterweight shaft 50 mm diameter, stainless steel, weight 8 kg – 18 lbs
Axes R.A. 80 mm diameter, alloy steel
Dec. 50 mm diameter, alloy steel
Bearings Pre-loaded tapered roller bearings
Worm wheels R.A. 315 teeth, 244 mm diameter, B14 bronze
Dec. 250 teeth, 192 mm diameter, B14 bronze
Worms screw Diameter 32 mm (r.a.) and 24 mm (dec.), tempered alloy steel, grinded and lapped
Transmission system Backlash-free system with timing belt and automatic backlash recovery
Motors 2 axes servo brushless
Power supply 24 V DC
Power consumption ~ 1 A while tracking 
~ 3 A at maximum speed 
~ 5 A peak
Go-to-speed Adjustable from 2°/s to 12°/s (9°/s in r.a.)
Pointing accuracy < 20” with internal multiple-stars software mapping
Average tracking accuracy < +/− 1" typical for 15 minutes (< 0.7" RMS) with multiple-stars software mapping and compensation of flexure and polar alignment errors
Security stop +/− 30° past meridian in r.a. (software)
+/− 35° past meridian in r.a. (mechanical)
+/− 170° interval in dec. (software)
+/− 172,5° interval in dec. (mechanical)
Operational temperature range (standard) - 15° C to + 35° C
+ 05° F to + 95° F
Storage temperature range - 40° C to + 50° C
- 40° F to +122° F
Special operational temperature range Optional, for very low temperature operations (until -35°C); see options for more details
Communication ports RS–232 port; GPS port; autoguide ST-4 protocol port; Ethernet port
Database Stars: by name, Bayer designation, Flamsteed designation, Bright Star Catalogue, SAO, HIP, HD, PPM, ADS, GCVS. 
Deep-sky: M, NGC, IC, PGC ,UGC limited up to mV = 16. 
Solar system: Sun, Moon, planets, asteroids, comets, artificial satellites. 
Equatorial and altazimuth coordinates. 
User defined objects, fast slewing positions.
Firmware features User defined mount parking position, 2-stars and 3-stars alignment function, up to 100 alignment stars for modeling, correction of polar alignment and orthogonality errors, estimate of average pointing error, storage of multiple pointing models, sidereal, solar and lunar tracking speed adjustable on both axes, declination-based autoguide speed correction, adjustable horizon height limit, pointing and tracking past meridian, assisted balance adjustment, manual or GPS based time and coordinates setting, dome control via RS-232, configurable atmospheric refraction, network settings, comets and asteroids filter, multi-language interface. Remote Assist via Internet connection.
PC control Remote control via RS-232 or Ethernet; proprietary ASCOM driver or Meade compatible protocol; update of firmware and orbital elements of comets, asteroids and artificial satellites via RS-232 or Ethernet; virtual control panel via RS-232 or Ethernet. Wi-Fi included to control the mount via Tablet, Smartphone etc.


    Customer Reviews

    Based on 2 reviews Write a review