Baader SC Deluxe 2" Visual Back with Integrated 2" Filter Holder (T-2 parts #17A & 17B)
- Eyepiece DeLuxe 2" (T-2 component # 17) with filter holder (M48), 2" and M58 thread for connection to all SC-Telescopes
- For permanent attachment of 2" filters at the end of the tube of SC telescopes
- Protects the interior of your SC-tube from dust by the incorporation of any Baader 2" filter (UV / IR cut filter).
- Filters from other manufacturers may cause problems when the filter outer diameter is larger than the Baader filter.
The Baader 2" Deluxe eyepiece clamp consists in the base version of two parts. The eyepiece clamp and a factory-mounted inner thread ring, that reduces the native telescope sided M58 inner thread to a 2" inner thread. In the Version SC-Deluxe eyepiece clamp with 2" filter holder(#2958144) the third part is a M48 filter holder. This filter holder must be threaded onto the 2" telescope-thread to hold any of Baader's 2" filters.
When both parts are threaded onto any SC-telescope, the combo looks like our normal 2" Deluxe-clamp, but the performance is much better than any 2" SC-clamp on the market, since the customer may seal the optical tube from dust and moisture and may cut off the unwanted parts of the light for their application, like using a UV/IR-Filter to cut the infrared - or use a nebula filter UHC-S or O III - or any other filter. The important difference is that our 2" filters are optically polished to not destroy or impair the wavefront of light and to retain perfect sharpness even under high magnification.
Below is a short animation of the Baader 2" DeLuxe eyepiece clamp in the version with 2" filter holder (#2958144) – to use on the 2" tube thread on most SC-telescopes. With the 3.3" Adapter (#2408145) you can also use it on C11 / C14 telescopes.
- C8-OTA w. regular Celestron Visual Back 1¼" attached
- 1¼" visual Back removed
- installing the 2" Filter-Holder onto the 2" Celestron end thread
- mounting any Baader 2" filter firmly onto the back end of any Celestron OTA
- threading the 2" eyepiece-clamp onto the 2" Filter-Holder
|OPTICAL LENGTH (MM)||53|
|CLAMPING SYSTEM||Screw clamps|
|T-2 PART #||17A + 17B|
|USAGE||to permanently mount 2" filters am Tubusende von SC-Teleskopen|
|SCREW TYPE||2x M4 clamping screws|
|INNER DIAMETER / CLEAR APERTURE (MM)||47|
|INNER CONNECTION (LENS SIDED)||Thread, M48, M58, 2" (50,8mm)|
|OUTER CONNECTION (LENS SIDED)||Dovetail ring, S65|
|INNER CONNECTION (EYEPIECE/-CAMERA-SIDED)||Clamp, 2" (50,8mm)|
|OUTER CONNECTION (EYEPIECE/-CAMERA-SIDED)||Dovetail ring, S65|
|COMPATIBLE BRANDS||UNC, Baader Planetarium, Celestron|
|TYPE OF ADAPTER||Eyepiece Clamp, Filter holder|