Paramount ME II Robotic German Equatorial Mount

Sold out
£13,500.00
SKU 1851155
  • Robotic German equatorial mount for serious astronomy and astrophotgraphy
  • Huge 109kg/240lb telescope with accessory payload
  • High precision and performance with 7arc sec periodic error and 30 arc sec pointing accuracy
  • Slew and track for up to 3 hours past the meridian
  • Through the mount cabling
  • Oversize bearings and high torque servo motors
  • Includes the SkyX Pro, TPoint pointing and camera control software
Description 

The Software Bisque Paramount ME II German equatorial mount has long been favoured and used by serious amateur astronomers and astrophotographers and can be found in some semi- and professional observatories.

Annie Maunder Astrographic Telescope facility (AMAT) at the Royal Observatory Greenwich that David Hinds Limited supplied and installed which included a Paramount MEII on an 18" high Paramount permanent pier. 

The photograph above shows the Annie Maunder Astrographic Telescope facility (AMAT) at the Royal Observatory Greenwich that David Hinds Limited supplied and installed which included a Paramount MEII on an 18" high Paramount permanent pier.

The Software Bisque Paramount MEII is high precision German equatorial mount (GEM) that is designed to deliver outstanding pointing, tracking and stability for amateur or professional astronomers. The Paramount ME II's  precision mechanics, when used in conjunction with TheSkyX Professional Edition PC software, creates a formidable imaging system that can help you achieve your observing and/or imaging objectives. 

The main features of the Paramount ME II include:

  • The ME II weighs 38kg (84lb) and can carry a total of 109kg (240 lb) total instrument capacity (218kg/480 lb total carrying capacity with counterweights)
  • Belt-driven gears offer virtually zero backlash
  • Maximum 7 arcseconds "Peak-to-Peak" periodic error before PEC
  • Clutchless design maintains T-Point assisted pointing accuracy
  • 30 arcsecond or better all sky pointing accuracy with T-Point and Super Model mount modelling software
  • Two port USB 2.0 hub on the Instrument Panel
  • Completely redesigned Control System (MKS 5000) featuring 2" USB computer to mount interface
  • Calibrated Polar-Alignment-Adjustments
  • Paramount 3" Losmandy-style VersaPlate (clamp)
  • Through the mount internal cabling for no cable snags or tangle
  • All internal electronics and wiring.
Please note: No tripod or pier is supplied with the Paramount ME II
    Specifications

    Component

     Paramount ME II

    Control system electronics

    MKS 5000  (Fifth generation)

    One board  includes all ports and control system  electronics

    Counterweight shaft 

    • 47 cm (18.5 in.) x 4.8 cm (1.875 in.) 
    • Carries up to six counterweights

    Counterweights

    14 kg (30 lb), two  included

    Declination bearing

    8-in (48 contact points)

    Declination gear diameter

    9.5 in.

    Declination housing

    5 in. x 0.5 in. wall 6061 aluminum tubing

    Declination shaft diameter

    3.0 in.

    Declination worm diameter

    1.0 in.

    Hours past meridian (track and slew)

    Maximum slew speed*

    4 degrees per second in right ascension and declination*

    *Maximum Slew Speed Disclaimer 

    The factory default of 80% maximum slew rate works well with most payloads over a wide range of temperatures. Paramount mounts can slew at the maximum slew rate with a balanced payload that is approximately 50% or less of the total rated capacity, when the spring plunger pressure adjusted to factory standards at moderate ambient temperatures. 

    As the mass of the payload increases, and/or the ambient temperature decreases, the mount may not be able to maintain maximum slew speeds. When near or above the stated capacity of the mount, or during cold temperature operation, slower maximum slew speeds and lower accelerations will be required.

    Motor diameter

    2.3 in.

    Motor torque

    30 in-oz

    On axis encoder

    optional - factory fit only

    Physical hard stop position

    Configurable

    Power supply

    221 W (+48VDC, 4.6A max.)

    Right ascension bearing

    8 in. (48 contact points)

    Right ascension gear diameter

    11.4 in.

    Right ascension housing

    7 in. x 0.5 in. wall 6061 aluminum tubing

    Right ascension shaft diameter

    3.0 in.

    Right ascension worm diameter

    1.0 in.

    Software included

    • TheSkyX Professional Edition for Mac
    • TheSkyX Professional Edition for Windows
    • TPoint Add On (Mac and Windows)
    • Camera Add On (Mac and Windows)
    • Multi-OS and Six License Add On for Mac and Windows

    Through the mount cabling

    Large diameter cable conduits. Cables can be run through the mount without altering polar alignment, removing the optical tube assembly, or altering the polar alignment and no mount disassembly is required.  

     

    USB ports on Instrument Panel

    Two (2)

    Weight (mount body with no payload)

    38 kg (84 lb)

    Weight capacity (total payload without counterweights)

    109 kg (240 lb)

     

    You recently viewed

    Clear recently viewed